AMSOIL Customer Testimonials
What people and companies say about using AMSOIL Synthetic Oil Products and other comments from Magazines etc. TEXAS TURBO Dragster Sets Record With AMSOIL. 10.43 Seconds At 130 MPH In A 1/4 Mile! "I always like to rely on the judgment of my engine builders, and they all believe in AMSOIL Synthetic Lubricants. With the heat and high rpms that racing boat engines must endure, AMSOIL gives the best lubrication. A boater who doesn't use a high-quality synthetic motor oil like AMSOIL is dollar-foolish." From world championship racing boats to weekend fishing boats, AMSOIL Synthetic Lubricants provide the same power, performance and superior long-lasting protection. Prototype of Perkins M-2 Uses AMSOIL $125,000 Proposed Retail Price Exotic Car Uses AMSOIL Synthetic Oil Michael Perkins, founder of Perkins Engineering, Inc., of Austin, Texas, has recently finished the prototype of the Perkins M-2 of "Texas Exotic" sports car. The prototype is lubricated entirely with AMSOIL Lubricants.The Perkins M-2 weighs approximately 2,200 lbs. And has a five-speed transmission. It has a SHO V-6 engine, with four cams, 24 valves, and either 245 or 300 horsepower, depending on the configuration. To keep this expensive equipment in top running condition , Michael decided that the Perkins M-2 will include AMSOIL Lubricants.Michael explained, "No question in the minds of people in the know that synthetic lubricants are today's answer to improved drive train protection, improved performance, reduced maintenance, and less pollution.AMSOIL is an obvious leader in the industry!The Perkins M-2, with the proposed retail price of $125,000, is an exotic car designed for successful people who, generally, are over 6 feet tall.Michael Perkins is living his dream by designing and building the Perkins M-2, and AMSOIL is grateful in helping him make his dream into a reality."Perkins Engineering is proud to offer the M-2 to America and also proud to include AMSOIL advanced product technology as part of this automobile's original equipment," Perkins said. Peter Finnerty, New York - talking about his1950 Allis-Chalmers Tractor (sent in pictures) you folks should see this. It's been 17 years since the valve cover was taken off, and all this time I uchanging the oil and filter once each year. I'm not sure of the hours involved: I estimate 60 to 80 hours per year with field mowing in the summer and snowplowing in the winter.When we opened the engine a few weeks ago and saw how clean it was, I thought I should leave it open and just show folks, but then I would need another tractor! I couldn't justify another "toy." Gil Dodgen, Garden Grove, California "I just thought I'd drop you a note to tell you how great AMSOIL has worked for me. I put the 10W-40 in my '79 Honda Civic at 5,000 miles. The car was going 5,000 miles on a quart of oil at that time. I've changed the oil at 25,000 and the filter at 12,500 as recommended (I even got lazy once and changed the oil at almost 30,000 miles.) Now, with 135,000 miles on the car, the little Honda still goes.... and I still get 5,000 miles on a quart of oil! It would appear that the engine has not worn significantly. At this rate I'll get a half million miles out of the car. I just put your oil in my new Toyota at 6,000 miles and the mileage jumped 3 miles per gallon -- a 10% increase.I can't understand why everyone doesn't use this fantastic product." Dennis Wright, Dennis Wright Farms, Albany, Ga. Dennis was amazed that on his John Deer Irrigation engine (normal oil change every 100 hours) he was able to extend his oil change beyond 600 hours with AMSOIL AME15W-40 and AMSOIL By-Pass Filters. Oil anaylsis taken at 600 hours showed NO BREAK-DOWN of the oil, very low wear metals and 8.6 acidity. His comment was that he was amazed that even in the hottest of our summer (103 degrees) that engine did not overheat! FACT: AMSOIL Saved Duluth Police Department Nearly 40% Per Mile! THE PROOF: Duluth, Mn. Police Department Demonstration; 4 Police squad cars, 6 months duration, 34,600 miles on the average, equipped with AMSOIL 10W-40 Engine Oil, AMSOIL Full-Depth Oil Filters, AMSOIL BY-Pass Oil Filter, AMSOIL Lifetime Air Filter.Material and maintenance cost for the 4 units with conventional lubricants and filters was $1,052.11. With AMSOIL Lubricants and Filters, the total was only $638.20 - nearly 40% saved per mile!AMSOIL saves in labor and material costs because it can be used many thousands of miles longer than conventional lubes. From: G-394 Semis Have Gone 200,000 Miles Without an Oil Change Danny Howell, Director of Maintenance for Dallas Carriers Corp. in Rockwell, Texas, conducted a demonstration in which semis were installed bumper-to-bumper with AMSOIL LUBRICANTS. AMSOIL 15W-40 Diesel Engine Oil was used in the engines, and AMSOIL Synthetic 85W-140 Gear Lube was installed in the transmissions, rear ends and the power train. Periodic oil analysis determined AMSOIL15W-40 was serviceable after 200,000 miles and the engines had minimal wear. AMSOIL 85W-140 was also still serviceable in the transmissions after 200,000 miles. Howell reported that both the rear ends and transmissions operated like new with AMSOIL 85W-140.From: Testimonials Volume VIII.
AMSOIL Helps Set New World Record For Motorcycles. Ron Krol's 1100cc Suzuki 7.38 Seconds At 180+ mph! On September 26, 1988, Ron Krol of Garfield Heights, Ohio used AMSOIL SYNTHETIC OIL at the ATCO race track in New Jersey to accomplish the unimaginable: he raced his naturally-aspirated (carbureted) 1100cc 16-valve Suzuki drag bike in the funny bike class. This class usually uses turbo-chargers and nitrous oxide Fuel!Ron and his AMSOIL-ized motorcycle didn't win at ATCO, their first ever national drag bike event (although he did make it to the semifinals). What Ron did do was set a new world record for carbureted motorcycles - 7.38 seconds elapsed time average quarter mile course! That's 180 + mph! Ron's bike also won Best Engineered Bike and Best Appearing Bike at ATCO.Ron owns and operates Krol Cycle, a high performance motorcycle parts and service shop. He is a factory representative for a major piston company and an AMSOIL Retail Account. Ron has been working on motorcycles for over fifteen years. So when Ron says "I know what works and what doesn't," most people listen. There is "no doubt" in his mind that "all the 'top dogs' in racing use synthetic oil, no matter what the logo says on the car or bike."Based on dynamometer tests on engines in his shop, Ron figures motorcycles gain "at least a couple of horsepower" using synthetic oil over petroleum. "There's no comparison," he says.Petroleum oils begin to break down and degrade almost immediately at these temperatures. The shortcomings of non-synthetic oils are especially obvious in drag bike racing, where the heat, high RPMs and pressures are magnified many times over a very short period (remember that Ron set his world record in 7.38 seconds). It's no wonder petroleum oils only wet an engines "appetite" for expensive engine parts! But using AMSOIL 20W-50 SYNTHETIC RACING OIL removed camshafts and rocker arms from Ron's engine's diets! Ron is convinced: "synthetic oils give more protection......they don't break down like petroleum oils." AMSOIL The Champions' Choice! Carlton Meyer of "How Sweet It Is, Too" Gene Deputy, President of TEXAS TURBO ENGINEERING, Inc. designs and builds racing engines. He is also an excellent drag racer. For the extra edge he needs to win, Gene uses AMSOIL SYNTHETIC LUBRICANTS in all his race cars. The Mustang GT is also used for street driving, as the power seats, door locks, electric windows and stereo system are still intact. A real crowd pleaser, Gene's car has been in several magazines. Including Hot Rod, however, to keep the Mustang GT running at its competitive peak, Gene relies on AMSOIL LUBRICANTS.
NO MATTER HOW YOU LOOK AT IT... IT MAKES SENSE TO USE THE VERY BEST... AND THAT IS AMSOIL! What AMSOIL products are recommended for your vehicle? How long can I go between synthetic oil changes? Click Here to shop for your AMSOIL Products and follow these instructions.
1.) Click on the Store button to be taken to a list of products.
This website is the homepage of an Authorized AMSOIL Dealer Contact Us with any questions or comments. © 1997-2007 Go-Synthetic.Com. All rights reserved.
|
REDUCE GAS COSTS WITH AMSOIL SYNTHETIC OIL! IT'S MORE IMPORTANT THAN EVER TO REDUCE OUR DEPENDENCE ON MIDDLE EAST OIL!
AMSOIL synthetic oils reduce friction in the engine, the transmission, and the differential. When friction is reduced the engine uses less energy to drive the wheels of your car or truck, thus increasing efficiency and increasing fuel economy. AMSOIL is real science backed by 35 years of research and over the road testing! AMSOIL Synthetic Oil has superior lubrication, extends your engine life by reducing friction, sludge, and wear and creates more torque and horsepower. AMSOIL Synthetic Oil is 100% USA made.
We MUST reduce our reliance on foreign oil! Use AMSOIL Synthetic Oil.
Power Point Presentation on the "History of AMSOIL"
Learn how to save over $3400 a year with AMSOIL
WELCOME!
APPLICATIONS
Order Secure Online
Order Now
AMSOIL PRODUCTS
WHY USE AMSOIL?
WE ALSO CARRY
LITERATURE
What AMSOIL products are recommended for your vehicle?
Click Here

**********************************************************************************************
**********************************************************************************************
|
AMSOIL Videos |
Product Lookup Guides
Auto/Light Trucks
PowerSports
Small Engine
TRICO Heavy Duty
Filter Lookup
Guides
Vintage Vehicle
HD Trucks/ Buses
By-Pass Installs
Cabin Filter Installs
Cross Reference Guides
Master Filter Cross
NGK Plugs/Wires
White Papers
Motorcycle Oils
Gear Lubes
Miscellaneous
Gear Lube Chart
Two-Cycle Chart
Frequent Questions